Hardware Solutions

Sharper Solutions for Automation, LLC, sells only hardware which has passed extensive testing.   We make those test results available to you on each items information page thus showing you why we use that “brand” of hardware for that application.

 

We DO NOT private label hardware to enable us to over charge for off the self products.  Most DNC companies DO NOT build their own hardware, they only put their label on some one else’s product.

 

We DO NOT “bait and switch” by listing inferior low cost hardware that will not perform just to get you hooked and then force you to “upgrade” when that solution fails.

 

We ONLY sell hardware solutions that work.

 

All of our hardware solutions WILL drip feed using your choice of hardware and/or software handshaking.

 

We DO sell state of the art products from made in the USA Quatech and Quabbin, as well as Digi, Moxa, ADR, Cisco, QSI and more….

 

– Want to connect your CNC Machines using a new or existing Wireless Ethernet Network?
No problem; connect your CNC machine using one of our 802.11b/g Wireless Ethernet to Serial devices. Check out our full line of Wireless Ethernet to Serial hardware.


– Want to connect your CNC Machines using a new or existing Wired Ethernet Network?

No problem; connect your CNC machine using one of our 1, 2, 4, 8, or 16 port Wired Ethernet to Serial devices. Check out our full line of Wired Ethernet to Serial hardware.


–  Have multiple Machines in work cells with PC allready in the location?

No problem; add multiple Serial Ports to your local computer and send/receive from to multiple CNCs at the same time. Check out our full line of PCI Serial Cards and/or USB Serial Hubs.


– Purchased a new Laptop without a serial port?

No problem; add from 1 to 4 serial ports to your laptop with our complete line of PCMCIA and PCIe Express Serial Cards!


– Old Controls without full Alpha/Numeric keyboards and want to do remote request?

No problem; do your remote request as well as operator reporting with our Bar Code Scanners or Handheld terminals!


– Have Old Controls without Serial Ports or still using Paper Tapes?

No problem; add a Behind the Tape Reader (BTR) from Advanced Digital Research with memory and a serial port!


– You have added a new machine that needs cable or have old wiring with issues?

No problem; We stock made in the USA RS232 Serial Cable which will provide a noise free connection from any serial port to any CNC Machine Tool. RS232 Serial Cables are made to order with RJ45 ends and include RJ45 to DB9 and/or DB25 connectors as needed for your hardware and machine. 

 

RS232 Serial Cables are avalable for next day delivery in leghts of 25 feet to 250 feet in 25 foot increments as well as in 3, 5 and 10 foot lengths. 

 

RS232 Serial to RJ45 connectors in both DB9 and DB25 are avalable for next day delivery in software, hardware, and full ACK/NAK, CTS/RTS configurations.